Product Colors and Sizes
DECATHLON
TUBE 26x2.2/2.5 SCHRADER VALVE 48MM
Regular price:
Reduced price: MUR 200.00
| Quantity | % Reduction |
|---|---|
Benefit from the discount once the quantity reached in your basket.
This inner tube will be suitable for your tire with a diameter of 26" inches, section 2,20 to 2,50 with a 48 mm Schrader valve.
Inner tube 26x2.20/2.50 Schrader valve for large section tires.
Choose a size
Reduced price:
Reduced price:
Product Videos
Product Characteristics
Praline Flavor
26-inch tires, section 2,20 to 2,50.ETRTO 57/64 - 559
Water Resistant
Optimized composition to ensure a good seal of your inner tube.
Additional Product Information
Composition
main part
- 10% Foamed PVC
- 90% Isobutylene isoprene butyl rubber
How to choose your inner tube
Note all the information visible on the sidewall of the tire (diameter and section). For example 26x2,35 means that it is a tire of 26 inches in diameter and 2,35 inches in width. On the sidewall of the tire, you will also find the dimensions in mm in the unit international ETRTO.
Take out your inner tube
Remove the used inner tube using B'TWIN tire levers
Checks before installing your inner tube
Check the condition of your tyre, replace it if necessary. Make sure there are no foreign bodies in the tyre. Check the condition of your rim tape. A rim tape, even slightly cracked, can cause damage. punctures. Check that your rim does not show any deterioration likely to damage your inner tube
Installing the inner tube
Check out our video before you start.Pre-inflate the tube slightly to avoid any risk of pinching.Insert the valve into the valve hole, taking care to respect the type of valve intended for your rim.Place your tube in the entire tire , push the tube so that it is positioned in the hollow of the rim. Take care not to pinch the tube when fitting the tire definitively.
Tire mounting
Start by mounting the tire at the valve. Finish mounting opposite the valve to avoid any pinching. Never mount your tire with a tool or a tire lever at the risk of pinching and puncturing the inner tube.
Tire inflation
Inflate your tire carefully, to the pressure recommended by the manufacturer (visible on the sidewall of the tire in PSI or in bars, 1 bar = 14,51 PSI). Regularly check the correct positioning of the tire during inflation.
The advice of the pro
To avoid pinch punctures and obtain the best performance from your tyre, we advise you to check and, if necessary, re-pressurize your tire before each ride.
Weight:
237 grams
Product Comments
Loading reviews…
All right
Good value for money
Of the two inner tubes mounted on my bike, one holds the pressure very well and the second deflates after a few days. The assembly cannot be blamed, I mounted my tires "by hand" without using the tire lifts again. Disappointed that this item fell through the quality control cracks.
