Product Colors and Sizes
DECATHLON
TUBE 26x1,2/1,5 PRESTA VALVE 48MM
Regular price:
Reduced price: MUR 200.00
| Quantity | % Reduction |
|---|---|
Benefit from the discount once the quantity reached in your basket.
This inner tube will be suitable for your 26" diameter tire, 1,20 to 1,50 section with 48 mm Presta valve.
26x1.20 to 26x1.50 inner tube, 48 mm Presta valve.
Choose a size
Reduced price:
Reduced price:
Product Videos
Product Characteristics
Compatibility
26" tires with a section of 1,2 to 1,5. ETRTO 30/38 - 559
Water Resistant
Optimized composition to ensure a good seal of your inner tube.
Additional Product Information
Composition
Membranes
- 90% Synthetic Rubber
- 10% Brass
The advice of the pro
To avoid pinch punctures and obtain the best performance from your tyre, we advise you to check and, if necessary, re-pressurize your tire before each ride.
Tire inflation
Carefully inflate your tire to the manufacturer's recommended pressure (visible on the tire sidewall in PSI or bar, 1 bar = 14,51 PSI). Regularly check that the tire is properly positioned during inflation.
How to choose your inner tube
Note all the information visible on the tire's sidewall (diameter and section). For example, 26x1,40 means that the tire is 26 inches in diameter and 1,40 inches wide. On the tire's sidewall, you will also find the dimensions in mm in the international ETRTO unit. For example, 38-559 means that the tire is 38 mm wide and has an internal diameter of 559 mm (i.e., 26x1,50).
Checks before installing your inner tube
Check the condition of your tire and replace it if necessary. Make sure there are no foreign objects in the tire. Check the condition of your rim tape. A rim tape, even a slightly cracked one, can cause punctures. Check your rim for any damage that could damage your inner tube.
Weight:
145 grams
Take out your inner tube
Remove the used inner tube using B'TWIN tire levers
Installing the inner tube
Watch our video before you begin. Slightly pre-inflate the tube to avoid any risk of pinching. Insert the valve into the valve hole, making sure to use the correct valve type for your rim. Place your tube completely inside the tire, pushing the tube so that it sits in the hollow of the rim. Be careful not to pinch the tube when finally mounting the tire.
Tire mounting
Start by mounting the tire at the valve. Finish mounting opposite the valve to avoid pinching. Never mount your tire with a tool or tire lever, as this can pinch and puncture the tube.
Product Comments
Loading reviews…
Nickel
Compliant
Very easy to use
