Product Colors and Sizes
DECATHLON
12'' TUBE SECTION 1,7 to 2,2 ANGLED SCHRADER VALVE
Regular price:
Reduced price: MUR 200.00
| Quantity | % Reduction |
|---|---|
Benefit from the discount once the quantity reached in your basket.
This inner tube will be suitable for your tire with a diameter of 12" inches, with a section of 1,70 to 2,20 angled Schrader valve.
Finally a 12" Schrader chamber easy to inflate!
Choose a size
Reduced price:
Reduced price:
Product Videos
Product Characteristics
Compatibility
12 inch Schrader valve tires. ETRTO 44/57 - 203
Water Resistant
Optimized composition to ensure a good seal of your inner tube.
Ease of use
The angled Schrader valve allows for easy inflation.
Additional Product Information
Composition
main part
- 10% Brass
- 90% Isobutylene isoprene butyl rubber
Remove an inner tube
Remove the used inner tube using B'TWIN tire levers
Installing the inner tube
Watch our video before you begin. Slightly pre-inflate the tube to avoid any risk of pinching. Insert the valve into the valve hole, making sure to use the correct valve type for your rim. Place your tube completely inside the tire, pushing the tube so that it is positioned in the hollow of the rim. Be careful not to pinch the tube when finally mounting the tire.
How to choose an inner tube
Note all the information visible on the tire's sidewall (diameter and section). For example, 12 x 2.00 means that it is a tire with a diameter of 12 inches and a width of 2.00 inches. On the tire's sidewall you will also find the dimensions in mm in the international unit ETRTO. For example, 50-203 means that it is a tire with a width of 50 mm and an internal diameter of 203 mm (i.e. 12 x 2,00).
Checks before installing an inner tube
Check the condition of your tire and replace it if necessary. Make sure there are no foreign objects in the tire. Check the condition of your rim tape. A rim tape, even a slightly cracked one, can cause punctures. Check your rim for any damage that could damage your inner tube.
Tire inflation
Carefully inflate your tire to the manufacturer's recommended pressure (visible on the tire sidewall in PSI or bar, 1 bar = 14,51 PSI). Regularly check that the tire is properly positioned during inflation.
The advice of the pro
To avoid pinch punctures and obtain the best performance from your tyre, we advise you to check and re-pressurize your tire before each ride.
Tire mounting
Start by mounting the tire at the valve. Finish mounting opposite the valve to avoid pinching. Never mount your tire with a tool or tire lever, as this can pinch and puncture the tube.
Product Comments
Loading reviews…
Your people are great and your prices exceptional.
