Children's inflatable discovery bodyboard 4-8 years (15-25Kg)

To help you catch more waves, we work to make our products as intuitive as possible and to integrate education into them. That's why this bodyboard has carefully placed handles, which will allow you to spontaneously get into the right position. Pictos located below the bodyboard illustrate each key step in catching the waves. A QR code will give you access to tutorials and other useful information: maintenance, 2nd life, etc.

The size of the bodyboard directly influences its stability and maneuverability. It must be adapted to the size of its user. This bodyboard is thus intended for children weighing between 15 and 25Kg, i.e. an age between 4 and 8 years old. A bodyboard that is too small will not float enough and will therefore cause you to miss waves. A bodyboard that is too big will be difficult to handle. Refer to the size selection help table. Not suitable for people > 40 kg. Exclusive use in supervised bathing area.

- Discoverer: Water up to the navel, no fins, foam <50cm, propulsion by pushing the feet on the ground, wave grip to the edge. Priority to pleasure and 1st sensations (Bodyboard with handles).- Beginner: Light turns in waves <1m, propulsion with flippers. Priority to learning the sport.- Confirmed: Waves up to 1m50, more speed and beginning of tricks (360°, El Rollo...).- Expert: All types of waves, mastery of tricks, even aerial ones: ARS, 360°,...

This bodyboard inflates by mouth. Do not force when inflating, an overinflated bodyboard will slide less well and could be damaged if exposed to high heat. During the gliding phase, this bodyboard is used in a lying position. It is important to wear a long-sleeved anti-UV top or a neoprene wetsuit to avoid irritation on the stomach and arms. .

Designed to catch and slide on the foam of the seaside, this product is used where the child has feet, with water up to the navel. When passing a small foam (<50cm) the child pushes on his feet towards the beach and lies face down on the bodyboard, hands on the handles, arms bent and legs stretched back. The use of flippers is not necessary. The texture of the fabric allows a pleasant contact with the skin. The application of wax is unnecessary.

WARNING ! Risk of injury due to the functional characteristics of this toy. Small parts - Choking hazard. To be used only in water where the child can walk and under the supervision of an adult. Particular vigilance must be applied in the event of wind and/or current. Safety equipment such as buoyancy aids or armbands are highly recommended. Not for use by children 3 years and under. Possible to add a leash, purchased separately.

The material of this inflatable bodyboard has been modified compared to previous versions. This change of material allows a reduction of the environmental impact of 38% (Decrease of 38% of the environmental impact in equivalent KG CO2 emitted). In addition, the robustness of the product has been revised upwards, thanks to this new material and the new product architecture (welding plan).

In order to keep your bodyboard in good condition, it is recommended to:- Do not jump with it in a swimming pool.- Do not leave it inflated in direct sunlight or at a temperature >30°C (Deflate it after use). Especially in a car in direct sunlight.- Before going into the water with your bodyboard, make sure your bodyboard is in good condition, that no welds or seams are damaged, that the valve is tightly closed and that he does not deflate.

It is normal for the air pressure in the bodyboard to change during the day or when putting it in the water. Indeed, any drop in temperature causes a decrease in air pressure: then proceed to a punctual re-inflation by mouth. If after re-inflation, the bodyboard noticeably loses pressure during a session, it is not normal. If so, make sure the cap is tightly closed.

Care should be taken to use this product under the intended conditions. Any inappropriate use is to be avoided. If, after normal use, the cap does not hold in place or air leaks are observable at the level of the welds of the bodyboard, then the guarantee procedure will be applicable within the time provided (2 years).

If the valve is leaking, this is usually due to the presence of sand, which you just need to remove. To do this, partially deflate the bodyboard and let it dry (Dry sand will be easier to remove than wet sand) .Use a pump to blow on the valve and remove the grains of sand by pressing the push button (Blowing by mouth can work but risks moistening the sand). In all cases, the cap must ensure the tightness.

Inflated: 70cm x 50cm x 12 cmDeflated: 15cm x 15cm x 4cm.